Chevrolet Valve Covers

Find products for your vehicle

            Chevrolet valve covers have a function which is to seal off the top of the engine, as well as to hold in the engine oil, guard the valvetrain, and provide support for engine-specific features including the PCV passages, the mounting places for the ignition coils, the oil-fill positions, and the sealing channels. If the cover cracks, warps, or has a sealing issue, motorists may see oil residue, smoke, or an odor caused by oil coming into contact with hot surfaces, or contamination near the spark plugs and ignition parts.

            The genuine GM valve covers are designed using the original dimensions and hardware arrangement found in all Chevrolet vehicles such as the Silverado, Tahoe, Suburban, Equinox, Traverse, Malibu, Colorado, and Camaro. It is important to get the right fit since even within the same model year, different engines may have different cover shapes, ventilation connections, gasket designs, and mounting positions.

            12649041 - : Valve Cover Gasket for GM Image

            Valve Cover Gasket

            Spark. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
            $33.40
            MSRP $51.41
            Save $18.01
            35% Off
            25532619 - : Valve Cover Gasket for GM Image

            Valve Cover Gasket

            Bonneville, LeSabre. 3.8l. With hi-output engine. All models. 3.3l. LaCrosse. Park Avenue. Impala, Monte Carlo. Grand Prix. Lucerne....
            $5.05
            MSRP $7.39
            Save $2.34
            31.7% Off
            55506707 - : PCV Valve Cover for GM Image

            PCV Valve Cover

            This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
            $8.58
            MSRP $12.54
            Save $3.96
            31.6% Off
            12691860 - : Valve Cover Gasket for GM Image

            Valve Cover Gasket

            2017-19. All. 6.6L diesel, upper components. Silverado, Sierra 2500 HD. Silverado, Sierra 3500 HD. This GM Genuine Part is designed,...
            $23.72
            MSRP $36.51
            Save $12.79
            35% Off
            12645141 - : Valve Cover Seal for GM Image

            Valve Cover Seal

            This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
            $17.81
            MSRP $26.01
            Save $8.20
            31.5% Off
            12609291 - : Valve Cover Gasket for GM Image

            Valve Cover Gasket

            $35.97
            MSRP $55.36
            Save $19.39
            35% Off
            12731657 - : Valve Cover Gasket for GM Image

            Valve Cover Gasket

            Incl.Spark Plug Tube Seals. Traverse. Acadia.
            $8.62
            MSRP $12.60
            Save $3.98
            31.6% Off
            12649907 - : Valve Cover Gasket for GM Image

            Valve Cover Gasket

            $8.14
            MSRP $11.90
            Save $3.76
            31.6% Off
            12649044 - : Valve Cover Gasket for GM Image

            Valve Cover Gasket

            Cylinder 4. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
            $7.01
            MSRP $10.25
            Save $3.24
            31.6% Off
            24503937 - : Valve Cover Gasket for GM Image

            Valve Cover Gasket

            All models. 3.8L, with supercharger. Park Avenue. Riviera. Impala, Monte Carlo. Bonneville, LeSabre. Grand Prix. This GM Genuine Part is...
            $2.33
            MSRP $3.42
            Save $1.09
            31.9% Off
            12672531 - : Valve Cover Gasket for GM Image

            Valve Cover Gasket

            Without turbo. Corvette. Left.
            $2.84
            MSRP $4.15
            Save $1.31
            31.6% Off
            12637683 - : Valve Cover Gasket for GM Image

            Valve Cover Gasket

            This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
            $27.34
            MSRP $42.07
            Save $14.73
            35% Off

            No results found for "valve cover". Here are some helpful search tips:

            • Search by a part name. Example: water pump.
            • Be less specific. Example: brake instead of ceramic brake.
            • Remove information such as make, year or model.
            • Can't find the part you are looking for? Contact us and we'll find it for you!


            What to Check Before Replacing a Chevrolet Valve Cover

            TL;DR: Simply matching the name of the vehicle is not enough to ensure a successful replacement of the Chevrolet valve cover. You must check the VIN, the engine specification, the production information, the gasket arrangement, and the ventilation connections before ordering it. In some cases, if the valve cover itself is distorted or if any of its built-in parts are damaged, replacing just the gasket will not cure the leak.

            A great many shoppers reach this section having seen oil around the cylinder head or having detected burnt oil after driving. Although these symptoms usually indicate the valve cover area, the cause should still be examined carefully since oil can seep from adjacent seals and crankcase pressure problems may cause a gasket which is otherwise in good condition to seem as if it is the only fault.

            Look Beyond the Gasket Surface

            A helpful diagnostic clue is to examine the cover areas surrounding the bolt bosses, the molded corners, the PCV ports, and the openings for the ignition coils. Hairline cracks and minor distortion are hard to spot when the component is fitted in place. In engines fitted with composite covers, aging and repeated heat cycles can alter the sealing surface to such an extent that a new gasket by itself will not be able to maintain even compression.

            If other leaks are present during the same repair, review related engine gaskets and oil pan gaskets before assuming every trace of oil originates at the valve cover.

            Why OEM Geometry Can Make a Difference

            A factory-made valve cover for a Chevrolet is designed to fit the original cylinder head surface, to match the positions of the fasteners, to follow the existing ventilation route, and to take into account the other components surrounding the engine. This is significant since a wrong cover may result in uneven gasket pressure or in the fittings being only slightly misaligned. When the engine still has its original factory setup, genuine GM parts can lessen the requirement for making adjustments compared with a generic replacement.

            Another point that is often neglected is that over-tightening may damage the new cover or cause the gasket to be compressed unevenly. Since the fasteners for the valve cover usually need a controlled torque rather than maximum force, the correct service procedure should be followed when installing them.

            Use the VIN to Narrow Down Similar-Looking Parts

            It is possible for Chevrolet engines to have production changes while they are being manufactured, which means that two engine covers that look very similar can have different ventilation ports, different provisions for sensors, or different mounting arrangements. Checking the fitment according to the VIN is particularly useful in the case of a model that has several engine families or when production changes took place during the year.

            While the upper engine is accessible, owners may also consider the condition of nearby camshafts and lifters, routine-service oil filters, and timing belts and chains when applicable.

            Key Takeaways

            • Make sure that the VIN and the exact engine number are confirmed before choosing a replacement cover.
            • Look at the cover itself, not just the gasket, to see if it is warped or cracked.
            • When you are troubleshooting repeated leaks, make sure to check the PCV and ventilation connections.
            • Check what seals or gaskets are included in the assembly.
            • When carrying out the installation, adhere to the proper tightening sequence and torque specification.

            Frequently Asked Questions

            What are some of the usual signs that a Chevrolet valve cover should be having it looked at?

            Any oil found around the top of the engine, oil seen in the spark plug wells, the smell of burnt oil, visible cracks, or frequent gasket leaks all provide a reason for a more detailed examination.

            Should I have the gasket or the entire valve cover replaced?

            If the cover is flat and undamaged, a gasket will usually be sufficient, but in the case where the cover is cracked, warped, or has damaged integrated ventilation features, it is generally better to use a complete Chevrolet valve cover assembly.

            Can Chevrolet engines made in the same year have different valve covers?

            Yes, the type of engine, the date when it was produced, the emissions setup, and the ventilation arrangement can all influence the right part, which is why it is advisable to verify the VIN.